American Bullnose Company
-
What is bullnose?
-
Why
does it take three days to complete a glazed bullnose order?
-
Why can't I order a factory edge bullnose with a width of less than 3 1/2
inches without an up charge?
-
Do you paint the bullnose
edge?
-
Can I order several different colors of bullnose to satisfy the minimum order
requirements?
-
Why does a full size glazed bullnose cost more than a bullnose that has to be
cut?
-
How do I place an order?
-
Can American
Bullnose Company™ make me a sample of glazed bullnose?
American Bullnose Company™ is interested in other questions you might have. Please email, fax, call or write us at the following:
Telephone: 303-781-2661
Fax: 303-781-2662
Address: 1500 West Hampden Ave., Suite 2-F
Englewood, CO 80110
E-mail:
info@americanbullnose.com
Bullnose is the rounded edge trim that is used to professionally finish a
tile installation. Typically bullnose is found on the edge of counter tops,
backsplashes, around the outside edges and curbing of a shower, stairs and
baseboard. The tile industry sometimes refers to bullnose as batiscopa.
Back to Top
The steps mandatory in producing glazed bullnose are as follows:
Day 1: Cut and bullnose your field tile to your
specification. Since we use machines that require water, the bullnose must dry
overnight.
Day 2: Glaze and load your bullnose in the kilns for
firing. A kiln firing cycle is 24 hours.
Day 3: Unload your bullnose from the kilns and box for
shipping.
The machine American Bullnose Company™ uses to fabricate bullnose is restricted
to pieces with a width of 3 1/2 inches or more. All bullnose generated with a
width smaller than 3 1/2 inches needs to be profiled by hand.
Back to Top
No! All our ceramic and glazed porcelain bullnose is glazed and
kiln fired
for a long lasting beauty and finish.
Because glaze matching is a time consuming process, each color and/or size of
bullnose will be priced as a separate order.
Why does a full size glazed bullnose cost more than a bullnose that has to be
cut?
Although full size bullnose requires less time to prepare for glazing and
firing, kiln capacity decreases up to 95%.
Back to Top
The orders should be
faxed, phoned, or mailed to the location
nearest you.
Back to Top
Can American
Bullnose Company™ make me a sample of glazed bullnose?
Yes! Because glaze matching is a time consuming process, it is necessary for
American Bullnose Company™ to charge $30.00 for all glazed bullnose samples.
Back to Top
Questions or comments about this web site? E-mail
webmaster@americanbullnose.com
American Bullnose Company, L.L.C. Copyright © 2002-04 [American Bullnose
Company, L.L.C.]. All rights reserved.